Secura Key 26SA Card Reader
 |
• 65,000 Card Capacity
• Weather Resistant for Outdoor Installation
• Patented Slotless TOUCH CARD® Reader
• No Control Panels or Secondary Electronics
• Low Power Consumption
• Non-Volatile Memory
• Timed Antipassback
• Remote Open Input
|
The legendary TOUCH CARD® reader is one of Secura Key’s major contributions to Access Control. Secura Key replaced unreliable reed switches and pickup coils with an array of self-calibrating Hall-Effect sensors, which read the polarity of magnetized locations on a Barium Ferrite card. The user places the card on a non-magnetic stainless steel plate, which eliminates the requirement for a card slot, and protects the circuitry from weather and vandalism. Extremely rugged weatherproof housings with high-security locks and steel mounting plates have kept these units in service for many years. They are still widely used in gate, parking, and telephone entry applications due to their reliability and simplicity.
The 26SA single-door card access control unit is fully programmable. Adding and deleting cards, and other programming functions are accomplished by using a special deck of programming cards, another Secura Key innovation. Nonvolatile memory retains programming after a power loss.
A remote open input allows the door or gate to also be controlled from a remote switch. The reader operates on low voltage AC or DC and consumes less than 100 milliamps.
The 26SA may be used with the Secura Key SecuRelay™, which allows the lock or gate control circuit to be remotely located for added vandal-resistance. Lexan® and metal surface housings and a flush-mount housing are available.
| PHYSICAL |
|
Surface Housing |
Flush Housing |
Metal Housing |
| |
Depth |
2.25 in (5.72 cm) |
1.50 in (3.8 cm) |
1.75 in (4.45 cm) |
| |
Width |
4.00 in (10.16 cm) |
5.50 in (13.97 cm) |
4.00 in (10.20 cm) |
| |
Height |
4.60 in (11.70 cm) |
7.63 in (19.38 cm) |
5.62 in (14.30 cm) |
| |
Weight |
20 oz (0.57kg) |
18 oz (0.51 kg) |
45 oz (1.28 kg) |
| |
Material |
Lexan® (polycarbonate) meets UL standard 94 flame retardant rating |
All Steel |
| POWER REQUIREMENTS |
10-24 VDC or VAC 50/60 Hz, 70 mA |
|
|
Requires contact closure |
|
|
SPST Solid-state contact, 1A, up to 60VAC/VDC
Programmable NO or NC or use SecuRelay™ |
|
|
Attach to mounting plate - SPDT contact, 115 VAC, 2A max.
(sold separately)
|
| SECURELAY™ |
3-wire data & power circuit (sold separately) |
| ENVIRONMENT |
Ambient Temperature |
|
-40o F to 158o F (-40o C to 70o C) |
|
|
0% to 100% relative humidity (non condensing) |
|
|
Non-Volatile (Programming retained, even if power is lost) |
|
|
65,000 sequentially numbered cards |
|
|
10 (card ID numbers must be unique) |
|
|
Programmable: 1/4 to 30 seconds – NO or NC |
|
|
Timed - Programmable 1 to 30 minutes |
|
|
PD-26 programming Deck |
| CABLE REQUIRED |
Power/REX/Latch – 7 cond., 22 AWG
SecuRelay - 3 cond., 22 AWG |
|
  
All dimensions in drawings are indicated in inches
Click on above images for enhanced view
|
|
|