Barrier Arm Gate Operator
 

 
SPECIFICATIONS:
* Duty type - medium-high volume traffic control; wide entrances
* Duty cycle - at 72(F (24(C) 100% motor run time
* Opening time - 4-8 sec (depending on beam length)
* Beam lengths - 13-23 ft (4-7 m)
* Beam types available - rigid, skirted
* Beam materials available - rigid: aluminum and wood skirted: aluminum
* Power supply - 230 VAC -10% to +6%; 60Hz
* Motor horsepower - 1/3 hp
* Motor speed - 1400-2800 rpm
*Ambient temperature range -   -13oF to 158oF (-25oC to 70oC)
* Hydraulic locking positions - opened and closed
* Cabinet dimensions (l x w x h) - 7 7/8 x 14 15/16 x 42 1/2 in. (20 x 38 x 108 cm)
* Cabinet weight - (approx.) 200 lb (91 kg)
* Electric motor - single phase, bi-directional
* Absorbed power - 220 W
* Current drawn - 1 A
* Pump delivery - 2.11, 3.16, 4.22 pt/min (1, 1.5, 2 l/min)
* Motor - winding thermal cutout 248oF (120oC)
*Torque - 0-331.87 ft-lb (450 Nm)
* Anti-crush system - hydraulic valves (by-pass)
* Mechanical deceleration adjustable
* Casing anti-corrosion treatment - cataphoresis
* Cabinet finish - polyester paint, powder coated RAL 2004
* Housing protection - IP 55
* Cooling - automatic fan
MODEL 640 FEATURES INCLUDE:
When Long Beams are Needed the Model 640 is the ideal hydraulic barrier for controlling heavy traffic at wide entrances. The 640 operates continuously, raising aluminum beams from 13 to 23 feet long in as little as 4 to 7 seconds. The 640 always stops smoothly and gently, thanks to an adjustable electronic braking system which slows the beam down before the end of its travel when opening and closing. A heat sensor monitors the operator temperature, switching on a cooling fan when required.
FLEXIBILITY:
The 640 can be outfitted with a skirt to stop unauthorized entry under the barrier arm.
OPERATING LOGISTICS:
The operation of the 620 or 640 Barrier is controlled by the 624 MPS Control Panel housed inside the operator cabinet. What accessories you install and which DIP switch settings you choose determine the logical operation of the beam. Furthermore, the barrier beam can be operated by hand during emergencies by means of a Manual Release mechanism. Two DIP switches on the control panel allow you to select the:
E (semi-automatic)
A (automatic)
P (parking)
R (remote) mode of operation